Proposed improvements to SiC MOSFET power converter technology overcome existing challenges

 

Transistors, which are devices that control or amplify electrical signals and power, are one of the most ubiquitous components of modern electronics. The most widely used transistor is known as the MOSFET, which stands for metal–oxide–semiconductor field-effect transistor. MOSFETs have been in use since the 1960s and have typically relied on silicon to act as a semiconductor. The latest iteration of the MOSFET uses silicon carbide as a semiconductor, known as SiC MOSFET. This has many advantages, but it has not been widely adopted for medium-voltage power conversion. This is because of several challenges associated with SiC MOSFETs that researchers hope to solve by combining novel technologies.

 

SiC MOSFETs offer many advantages over traditional transistors. Compared to the current technology, SiC MOSFETs can meet the demands of modern electronics by improving efficiency and power density. However, if you were to just switch out the current technology for SiC MOSFETs as is, there would not be enough of a benefit to justify the transition. In order to get the most out of SiC MOSFETs and expand their use across a wide range of applications, researchers employed novel control technologies and strategies to improve how the SiC MOSFETs work in medium-voltage applications.

 

The techniques were described in a paper published on April 22 in iEnergy (DOI 10.23919/IEN.2022.0001).

 

“For medium-voltage power conversion, 10 kV SiC MOSFETS have inherent superiorities, such as high breakdown voltage, fast switching, high temperature operation, and low specific on-state resistance,” said paper author Slavko Mocevic, a researcher at the ABB Corporate Research Center in Raleigh, NC in the United States. 

 

Mocevic also described the many practical applications for the technology. “In applications such as electric ships, highly populated urban areas, and, in some cases, renewable energy,” Mocevic explained, “often limited and expensive land and space require high-density and high-efficiency converters. If the converter uses a 10 kV SiC MOSFET, the system benefits from higher efficiency, higher switching frequency, high-density, network simplification, and high control bandwidth can be unlocked.”

 

Researchers identified many novel technologies that can help with the adoption of SiC MOSFETs in medium-voltage power converters. These included enhanced gate-drivers, Gate-driver power supplies suppressing electromagnetic interference, and the addition of wireless power transfer converters. However, researchers identified the switching-cycle control (SCC) and the integrated capacitor-blocked transistor (ICBT) control methodologies as the most important. “The potential of developed SCC and ICBT control methodologies combined with 10 kV SiC MOSFET devices is enormous,” said Mocevic. “These converters fully exploit the advantage of the fast commutation speed and high switching speed offered by SiC. They also strikingly elevate power density and efficiency and relax cooling requirements.” Other benefits of this combination of technologies include the ability to utilize both alternating current (AC) and direct current (DC) power, low frequency operation, and unrestricted voltage.

 

By overcoming challenges like electromagnetic interference, high switching frequency, fast voltage transitions, and the need for high-voltage insulation, the SiC MOSFET technology can be more broadly applied to medium-voltage converters. Looking ahead, Mocevic said, “The immediate next step is to improve performance and fully understand the behavior of this converter to ensure stable operations in all situations for all targeted applications. The ultimate goal is to develop a family of medium-voltage circuit networks that utilize SCC and ICBT control that can fully utilize the power processing capacity of SiC devices. This will effectively tackle the lack of circuit solutions currently barring their adoption.”

 

Other contributors include Jianghui Yu, Boran Fan, Keyao Sun, Joshua Stewart, Yu Rong, He Song, Vladimir Mitrovic, Ning Yan, Igor Cvetkovic, Rolando Burgos, Dushan Boroyevich, Christina DiMarino, Dong Dong, Jayesh Kumar Motwani, and Richard Zhang of the Center for Power Electronics Systems at the Bradley Department of Electrical and Computer Engineering at Virginia Tech; Yue Xue at the Center for Electromechanics at The University of Texas at Austin; and Jun Wang at the Department of Electrical and Computer Engineering at the University of Nebraska-Lincoln.

 

The Advanced Research Projects Agency-Energy (ARPA-E) under the United States Department of Energy supported this research.

 

The paper can be found on IEEE Xplore (https://ieeexplore.ieee.org/document/9762242) and also available on SciOpen (https://www.sciopen.com/article/10.23919/IEN.2022.0001) by Tsinghua University Press.

 

##

 

About iEnergy 

 

iEnergy (Published by Tsinghua University Press), has multiple meanings, intelligent energy, innovation for energy, internet of energy, and electrical energy due to “i” is the symbol of current. iEnergy, publishing quarterly, is a cross disciplinary journal aimed at disseminating frontiers of technologies and solutions of power and energy. The journal publishes original research on exploring all aspects of power and energy, including any kind of technologies and applications from power generation, transmission, distribution, to conversion, utilization, and storage. iEnergy provides a platform for delivering cutting-edge advancements of sciences and technologies for the future-generation power and energy systems.

 

 

About SciOpen 

 

SciOpen is a professional open access resource for discovery of scientific and technical content published by the Tsinghua University Press and its publishing partners, providing the scholarly publishing community with innovative technology and market-leading capabilities. SciOpen provides end-to-end services across manuscript submission, peer review, content hosting, analytics, and identity management and expert advice to ensure each journal’s development by offering a range of options across all functions as Journal Layout, Production Services, Editorial Services, Marketing and Promotions, Online Functionality, etc. By digitalizing the publishing process, SciOpen widens the reach, deepens the impact, and accelerates the exchange of ideas.

---

---