image: The UNU-INWEH report is available post-embargo at www.inweh.unu.edu view more
Credit: UNU-INWEH
A United Nations University study compares for the first time the effectiveness and costs of many different technologies designed to remove arsenic from groundwater - a health threat to at least 140 million people in 50 countries.
Released today by UNU's Canadian-based Institute for Water, Environment and Health, the report draws on 31 peer-reviewed, comparable research papers published between 1996 and 2018, each describing new technologies tested in laboratories and / or in field studies.
And while no single technology offers a universal solution, the research helps point to remedies likely to prove most economical and efficient given the many variables present in different locations worldwide.
Serious health, social and economic losses are caused worldwide by arsenic-contaminated water and a wide range of technologies exists to remove it but "their widespread application remains limited," according to the report.
From 2014 to 2018, over 17,400 arsenic-related publications were published and "there is a myriad of reportedly 'low-cost' technologies for treating arsenic-contaminated water. But the specific costs associated with these technologies are rarely documented," says Duminda Perera, a Senior Researcher at UNU-INWEH and report co-author.
The summary of costs and effectiveness of the few dozen arsenic remediation technologies that are directly comparable in those respects (table: http://bit.ly/2MpVWaa) can serve as a preliminary guideline for selecting the most cost-effective option, he says. It may also serve as an initial guideline (minimum standard) for summarising the results of future studies describing arsenic remediation approaches.
The report notes that "arsenic-removal technology should only be seen as efficient if it can bring the water to the WHO standard" (in 2010, WHO's recommended a drinking water limit of 10 μg/L - micrograms per litre), but countries with resource constraints or certain environmental circumstances (e.g. typically high arsenic concentrations in groundwater) have much higher, easier-to-reach concentration targets.
"While this may help national policymakers report better results for their national arsenic reduction efforts, it may have the opposite effect on public health," the report says. "Higher thresholds will not help solve this public health crisis. On the contrary, if a country has a feeling that the arsenic situation is coming under control, this may reduce the sense of urgency in policy circles to eradicate the problem, while the population continues to suffer from arsenic poisoning."
"This policy approach is not well-conceived as it does not effectively resolve the issue."
It is estimated that in Bangladesh, for example, where the nationally-acceptable arsenic limit in water is set to 50 μg/L, more than 20 million people consume water with arsenic levels even higher than the national standard.
And globally, despite international efforts, millions of people globally continue to be exposed to concentrations reaching 100 μg/L or more.
Key findings:
UNU studied 23 technologies independently tested in laboratory settings using groundwater from nine countries - Argentina, Bangladesh, Cambodia, China, Guatemala, India, Thailand, the United States, and Vietnam - and demonstrated efficiencies ranging from 50% to ~100%, with a majority reaching >90%. About half achieved the WHO standard of 10 μg/L.
14 technologies tested in the field (at the household or community level, in Argentina, Bangladesh, Chile, China, India, and Nicaragua) achieved removal efficiency levels ranging from 60% to ~99%, with 10 removing more than 90%. Only five reached established the WHO standard.
Technologies that demonstrate high removal efficiencies when treating moderately arsenic-contaminated water may not be as efficient when treating highly contaminated water. Also, the lifetime of the removal agents is a significant factor in determining their efficiency.
For lab tested technologies, the cost of treating one cubic meter (m³) of water ranged from near-zero to ~US$93, except for one technology which cost US$299 per m³. For field tested technologies, the cost of treating 1m³ of water ranged from near-zero to ~US$70.
Key factors influencing removal efficiencies and costs:
- the arsenic concentration of the influent water
- pH of the influent water
- materials used
- the energy required
- absorption capacity
- labour used
- regeneration period and
- geographical location
Remediation technologies that demonstrate high arsenic removal efficiencies in a laboratory setting need to be further assessed for their suitability for larger-scale application, considering their high production and operational costs.
Costs can be reduced by using locally available materials and natural adsorbents, which provide near zero-cost options and can have high arsenic removal efficiencies.
Leading authors Yina Shan and Praem Mehta, who worked at UNU-INWEH and are now at McMaster University, noted that exposure to arsenic can lead to severe health, social and economic consequences, including arsenicosis (e.g. muscular weakness, mild psychological effects), skin lesions and cancers (lung, liver, kidney, bladder, and skin).
Social implications of these health impacts include stigmatization, isolation, and social instability, they added. Arsenic-related health complications and mortality also lead to significant economic losses due to lost productivity. The economic burden in Bangladesh is projected to reach US$13.8 billion by around 2030.
Looking ahead, the study identifies priority areas to assist in commercializing wide-scale implementation of arsenic removal technologies.
"The main objective of the report is to help accelerate the wide-scale implementation of remediation solutions to alleviate, and ultimately eradicate, the problem of arsenic-contaminated water consumption over the next decade and meet the world's Sustainable Development Goals," says UNU-INWEH Director Vladimir Smakhtin.
"This report aims to inform decision-makers who face an arsenic public health challenge, of the specific costs and effectiveness of technologies tested in laboratory or field settings. It also urges researchers to present cost and effectiveness data cohesively to better inform planners' and policymakers' choice of the best arsenic remediation technologies."
"Today, the current science and knowledge on arsenic remediation technologies may be mature enough to help significantly reduce the numbers of people affected by this public health problem. However, the effective translation of research evidence and laboratory-level successes into quantifiable and sustainable impacts on the ground requires a concerted and sustained effort from policymakers, engineers, healthcare providers, donors, and community leaders."
###
Authors
- Yina Shan, UNU-INWEH, McMaster University
- Praem Mehta, UNU-INWEH, McMaster University
- Duminda Perera, Senior Researcher, UNU-INWEH
- Yurissa Varela, UNU-INWEH, University of Ottawa
Background
High natural levels of inorganic arsenic exceeding the WHO limit are a characteristic feature of groundwater in many countries, including Bangladesh, India, Nepal, Mongolia, and the United States.
Most arsenic-contaminated groundwater is caused naturally, some is caused by industry - mining, fertilizers / pesticides, waste disposal, and manufacturing.
In nature, the poison can be released from arsenic-rich rocks by high acidity (pH) in oxygen-rich groundwater. Arsenic contamination is also mobilized by human interventions, such as.
Globally, the primary route of human exposure to arsenic is contaminated drinking water; some is the result of irrigating crops with contaminated water.
Sustainable Development Goal 3 ("good health and wellbeing"), adopted by UN Member States in 2015 for achievement by 2030, recognized the need to remove hazardous chemicals, including arsenic, from the world's ecosystems. SDG 3.9 aims to "substantially reduce the number of deaths and illnesses from hazardous chemicals and air, water, and soil pollution and contamination." And SDG 6 ("Clean water and sanitation") includes target 6.3, calling for an "improvement to water quality by reducing pollution, eliminating dumping and minimizing the release of hazardous chemicals and materials" (https://sustainabledevelopment.un.org).
UNU-INWEH
The UNU Institute for Water, Environment and Health is a member of the United Nations University family of organizations. It is the UN Think Tank on Water created by the UNU Governing Council in 1996. Its mission is to help resolve pressing water challenges of concern to the UN, its Member States and their people, through knowledge- based synthesis of existing bodies of scientific discovery; cutting edge targeted research that identifies emerging policy issues; application of on-the-ground scalable solutions based on credible research; and relevant and targeted public outreach.
UNU-INWEH is hosted by the Government of Canada and McMaster University.