The sol-gel method of materials preparation is a suitable technique that can be used to obtain composite materials with reinforced properties and produce hybrid coatings. It is capable of producing materials that combine the complementary properties of the inorganic and organic materials.
Engineering plastics such as polymethylmetacrylate or PMMA are distinct candidate materials that can benefit from reinforcement with inorganic materials. Silica (SiO2), is a suitable reinforcing material that was used in this investigation.
In this paper researchers from Universidad Autonoma de Sinaloa, Fuente de Poseidon y Prol and Centro de Investigacion y Estudios Avanzados del Instituto Politécnico Nacional, J.L. Almaral-Sanchez, M. Lopez-Gomez, R. Ramirez-Bon, J. Munoz-Saldana, prepared hybrid SiO2-PMMA coatings using the sol-gel method and measured coating hardness. They applied two depth sensing indentation (DSI) systems, each one using indenters with different geometry and size, to analyze the mechanical behaviour of hybrid coatings of SiO2-PMMA with different molar ratios. Applying an indentation model, the absolute hardness of the coatings was evaluated using both systems as a function of the PMMA content of the hybrid films.
From the indentation measurements the researchers found that the mechanical properties of the hybrid coatings were improved in comparison with those of conventional acrylics. Hardness of the hybrid coatings was from three times to more than one order of magnitude higher than the acrylic hardness, depending on the molar ratio. An extra hardening phenomenon was measured at the surface of the coatings, which is probably due to an enrichment of silica at this region. Finally they found that hardness of the coatings decreases monotonically with the PMMA content. These results allow hybrid coatings to be made with mechanical properties tailored to the individual application.
The AZojomo article is available to view at http://www.azom.com/Details.asp?ArticleID=3413
*AZojomo publishes high quality articles and papers on all aspects of materials science and related technologies. All the contributions are reviewed by a world class panel of editors who are experts in a wide spectrum of materials science. [See http://www.azom.com/Journal%20Editorial%20Board.asp]
AZojomo is based on the patented OARS (Open Access Rewards System) publishing protocol. The OARS protocol represents a unique development in the field of scientific publishing – the distribution of online scientific journal revenue between the authors, peer reviewers and site operators with no publication charges, just totally free to access high quality, peer reviewed materials science. [See http://www.azom.com/azojomo.asp and http://www.azom.com/oars.asp]